Cast-steel gate valve — API 600 selection
Configurable cast-steel isolation valve for technical selection against API 600 requirements.
- Design and test standards
- API 600 · ASME B16.34
Review technical data→Forged-steel gate valve
Forged construction for high-pressure service.
- Design and test standards
- API 602 · ASME B16.34
Review technical data→Cast-steel globe valve
Line isolation and limited throttling.
- Design and test standards
- API 623 · ASME B16.34
Review technical data→Forged-steel globe valve
Compact high-pressure globe valve.
- Design and test standards
- API 602 · ASME B16.34
Review technical data→Floating-ball valve
Quarter-turn isolation with optional fire-safe design.
- Design and test standards
- API 608 · ISO 17292
Review technical data→Trunnion-mounted ball valve
Large-bore high-pressure pipeline valve.
- Design and test standards
- API 6D · ISO 14313
Review technical data→Concentric resilient-seated butterfly valve
Economical large-bore isolation.
- Design and test standards
- API 609 · EN 593
Review technical data→Triple-offset metal-seated butterfly valve
Metal-seated severe-service design.
- Design and test standards
- API 609 · ASME B16.34
Review technical data→Swing check valve
Reverse-flow prevention using a hinged disc.
- Design and test standards
- API 594 · BS 1868
Review technical data→Dual-plate wafer check valve
Compact non-return valve.
- Design and test standards
- API 594 · ASME B16.34
Review technical data→Globe control valve
Sized from process data.
- Design and test standards
- IEC 60534 · ISA 75
Review technical data→P12Safety and relief valvesSpring-loaded safety valve
Overpressure protection subject to capacity sizing.
- Design and test standards
- API 520 · API 526
Review technical data→Y-strainer
Pipeline solids removal.
- Design and test standards
- ASME B16.34 · Project specification
Review technical data→P14Actuation and controlsElectric valve actuator
On/off or modulating drive.
- Design and test standards
- IEC 60529 · ISO 5210
Review technical data→P15Castings and valve componentsValve-body and bonnet castings
Castings supplied to drawings.
- Design and test standards
- ASTM material specification · EN 10213
Review technical data→P16Castings and valve componentsValve trim and sealing components
Custom trim and sealing elements.
- Design and test standards
- Drawing specification · Project specification
Review technical data→Corrosion-resistant steel gate valve
Steel gate valve selected for corrosive service.
- Design and test standards
- API 603 · ASME B16.34
Review technical data→Bellows-sealed globe valve
Globe valve with a metallic bellows stem-sealing barrier.
- Design and test standards
- ASME B16.34 · Applicable product standard
Review technical data→Metal-seated ball valve
Metal-seated ball valve for severe isolation service.
- Design and test standards
- API 608 · ISO 17292
Review technical data→Spring-assisted axial-flow check valve
Axial-flow non-return valve with spring-assisted closing.
- Design and test standards
- MSS SP-126 · ASME B16.34
Review technical data→Angle control valve
Angle-pattern valve sized for process control service.
- Design and test standards
- IEC 60534 · ASME B16.34
Review technical data→P22Safety and relief valvesPilot-operated pressure-relief valve
Pilot-operated pressure relief valve subject to certified sizing.
- Design and test standards
- API 520 · API 526
Review technical data→P23Actuation and controlsValve gearbox
Manual gearbox matched to valve load and interfaces.
- Design and test standards
- ISO 22109 · ISO 5210
Review technical data→P24Actuation and controlsPart-turn actuated-valve package
Integrated part-turn valve, actuator and controls package.
- Design and test standards
- ISO 5115 · ISO 5211
Review technical data→